Total Experience 13 Years & above in the Fabrication of pipes / Blasting & Painting / Coating / Insulation in Oil & Gas field (Const.)

Designation:    Supervisor Painting/Insulation

To undertake challenging career opportunity in the oil & gas industry where I can utilize my broad training, skills and experience acquired over the past 13 years across the oil & gas resources Industry in key roles such as supervising. I possess strong technical and problem-solving skills with an ability to work in confined spaces, remote areas and in challenging condition. Record of achievement in coordinating the activities of crew and organizing their combined efforts to ensure all tasks are carried out safely in accordance with approved company practices in an efficient manner to achieve the best results all times.

Well versed with Construction activities like Piping Fabrication and Erection, Line checking, firefighting System, Test pack preparation, Hydro testing, Punch closing, Box–up & Mechanical Completion, Leak test, Supporting to pre-commissioning & Commissioning Stages.  

• Very good verbal & written communication skills, comprehensive problem-solving ability, ability to deal with people diplomatically, good creativity & presence of mind, eager to learn, hardworking & Team Familiar with Multi skills.

• Diploma in Mechanical Engineering

• Well versed in MS-Office (Excel, Word. PowerPoint and Outlook)  

(This list not intended to detail all aspects of the assigned work but is representative of the job’s overall responsibilities).

• Under Monitoring the various Sub Contractors SINOPEC, KAEFER, NSH, CAPE, SBC, MTC for painting work progress to assure timely completion, with periodic status reports provided to the Production Management.
• Promotes a safe working environment using safety briefs; promoting/enforcing PPE, discussing job hazard analysis and accident prevention.
• Ensures the Quality of the paint processes for the projects required to validate in-process work, support operational needs and identify opportunities for improvement.
• Reviews paint production processes and equipment to ensure that continuous improvement principles are considered and utilized.
•  Identify equipment issues that require corrective action and ensure completion of required repair work.
• Provides direction to the work group and holds staff accountable for results and improvements, taken corrective measures as required. 

KHARAFI NATIONAL (ABJ Engineering), KUWAIT.

Duration     : October 2012 to August 2017

AL-MAGWA ENGINEERING AND CONTRACTING COMPANY W.L.L ,KUWAIT

Duration     :  February 2009 to September 2012

• Ensure client verification and contractor inspection and coating manufacturer representative inspection of applied corrosion protection system – inclusive of protective coating, thermal spray coatings.
• Verify contractor’s compliance with design drawings, specifications, procedures and inspection and test plans.
• Review coating specification and identify omissions and clarification.
• Test and approve blaster & paint applicators and inspectors in accordance with client specification.
•  Formulate quality control training program as required.
• Ensure yard compile full and accurate reports of all coating activities.
• Resolve contractor’s technical queries concurrence from structural and engineering site leads.
• Understand the project schedule and be protective in assessing where activities could impact the planed progress advising.
• Develop and review coating procedure and inspection test plan
• Familiarize self with design drawings, specification, applicable codes, standards and practices and project quality plan.
• Actively support coordination / progress meeting with agenda to facilitate meeting execution.
• Oversee the preparation, tracking and completion of contractor’s coating punch list.
• Document and communicate Lessons Learned in all above responsibilities.
• Ensure all coating materials are stored in accordance with specification & procedures (MSDS is displayed where necessary) and all waste products are disposed of safely & correctly. 
• Develop and review coating procedure and inspection test plan
• Understand the project schedule and be protective in assessing where activities could impact the planed progress advising HST leads.
• Familiarize self with design drawings, specification, applicable codes, standards and practices and project quality plan.
• Actively support coordination / progress meeting with agenda to facilitate meeting execution.
• Oversee the preparation, tracking and completion of contractor’s coating punch list.
• Document and communicate Lessons Learned in all above responsibilities.
• Ensure all coating materials are stored in accordance with specification & procedures (MSDS is displayed where necessary) and all waste products are disposed of safely & correctly.

• Responsible for Piping fabrication and Erection, Hydro testing, line checking, test package preparation and inspection with the Client.
• Promote and implement safe working practices in the workplace.
• Monitor the all inspection and QA/QC Documentation & submit to the client for approval and review the P & ID drawing for the boundary marking.
• Prepared more than 100 No TIE-IN, Steam line, Seawater, Nitrogen line, demine water line, with existing line Including materials preparation marked in the P&ID and ISO Drawing, GA Drawing and submitted to the Client for final approval for Engineering Department and LNG Operation Department. 
•  Supervised Piping works, Spool erection and all further activities related to piping, supporting including test pack clearance, hydro testing, Punch items clearance, pre-commissioning and assistance for commissioning.
• Isometric released for fabrication in shop and distribution among the individuals (Foremen) in shop as per the record given by Material Withdrawal Department.
• Address platform problems and revert with actions taken.
• Liaise with engineering disciplines to effect timely responses for Engineering Queries
• Provide assistance to piping Supervisor/Foreman’s for critical erection and follow

them to attain productivity.

• Attending weekly progress meeting with Client.
• Monitoring on isometric drawing records and spool tracking system for individual Foreman.
• Distribution of drawings to the Foremen and monitoring the jobs.
• Co-ordination with Senior Engineer & Client.
• Monitoring on Daily Progress Report and reporting to Construction Manager.
• Monitoring of erection of spool as per priority basis.
• Attend the meeting of daily basis with client & company.
• Attend the punch items of client & company priority wise.
• Attend the extra work of the company and make the paper, take the sign from authorized

Person and submitted to Office,

• Work done under live plant, co-ordinate with operational supervisor, prepare work permit

of live area.

• Worked on Tie-point, existing new lines in live areas.

• To supervise all aspects of the coating and insulation fabrication work to ensure that it is carried out in accordance with the relevant Company and Statutory requirements.
• Confirm that the Fabrication contractor has a robust execution plan for module fabrication, load-out and hand-over.
• Work with engineering and fabrication teams for the review and approval of all Contractor deliverables for engineering and construction. Ensuring specification and Code compliance and the deliverables schedule is maintained.
• Identify and highlight any risk opportunities or threats that may have a favorable or adverse impact on module delivery within project cost, quality or schedule objectives. Assist in the development and implementation of contingency plans etc.
• Develop and update weekly/monthly performance management reporting to monitor progress on key performance indicators (KPI's) & critical analysis of data.
• Support the review and swift resolution of Site Queries and Technical deviation requests.
• Monitor and report on the structural fabrication progress.
• To ensure that all construction aspects of the project on site are supervised in a safe and efficient manner.
• To provide input for lessons learned.

 Ensure adherence to design drawing and coating specification requirements related directly with product and personnel qualification, surface preparation product application, testing of work, coating application and work man ship monitoring, and approval of field records, documents, registers and check sheets for project requirement acceptance.     

• Identify the total scope of project requirement of material to complete the 100% work.
• Site focal point for painting work identifies the total painting SCOPE and requirement of material.
• Coordination with contractor to get daily progress details of Blasting & painting take necessary action.
• Maintain permanent communication with the client and management to supervisor and control the painting activity.
• Train local employees to supervise progress reporting system.
• Monitor the daily activity of shop & field daily progress; engage them for priority systems completion if any.
• Attend to the Daily Test pack meeting with sub-contractor for the Expedition for the priority system.
• Good Knowledge of GA drawing & P&ID, Piping Isometrics & Structural Drawings.
• Responsible for monitoring, checking, controlling of progress status of shop and field production.
• To check the substrate in accordance to the relevant standards before elution of blasting & painting.
  • To control and allocate manpower to handle various work   assignment in accordance to the project schedule.
  • To check and ensure the climate conditions as per acceptable standards.
    • Paint curing tests (M.E.K. Test)
    • Holiday testing impact tests, Hardness testing, salt and chloride contamination testing and Cross adhesive tests as per specification.
      • Preparation of painting inspection reports and other relevant inspection documents.
      • To conduct inspection to surface preparation, subsequent coatings.
      • Inspection of paint materials and to maintain in accordance with product batch certificates.
      • To coordinate with client personal, supervision, paint manufacturers to conduct inspections.
      • To attend project quality control meetings.
      • Represent project site meetings, preparation of site requires work activity.
  • Wrapping/coating of underground pipeline as per specification.

         During the routine working period, I have proven to be an excellent employee in the company & have wide knowledge in the field of Blasting & painting.

HSE Induction, H2S Awareness & Escape, HSE Gas testing, basic life support foundation -first aid, Initial Fire response, permit to work, H2S training, PTW (Job Performer), Fire Fighting, Work at Height, Confined Space Entry. 

         .

   If I am given an appointment in your esteemed Organization, I shall do my best to give you the fullest Satisfaction and I certify that the above information is true & correct to my knowledge

Best regards

Yours truly,

• To undertake challenging career opportunity in the oil & gas industry where I can utilize my broad training, skills and experience acquired over the past 13 years across the oil & gas resources Industry in key roles such as supervising. I possess str 13 years by 2019

• Painting Supervisor at KHARAFI NATIONAL (ABJ Engineering), KUWAIT
  Oct 2012 - Aug 2017

   Ensure client verification and contractor inspection and coating manufacturer representative inspection of applied corrosion protection system – inclusive of protective coating, thermal spray coatings.  Verify contractor’s compliance with design drawings, specifications, procedures and inspection and test plans.  Review coating specification and identify omissions and clarification.  Test and approve blaster & paint applicators and inspectors in accordance with client specification.  Formulate quality control training program as required.  Ensure yard compile full and accurate reports of all coating activities.  Resolve contractor’s technical queries concurrence from structural and engineering site leads.  Understand the project schedule and be protective in assessing where activities could impact the planed progress advising.  Develop and review coating procedure and inspection test plan  Familiarize self with design drawings, specification, applicable codes, standards and practices and project quality plan.
• Blasting & Painting Supervisor at AL-MAGWA ENGINEERING AND CONTRACTING COMPANY W.L.L ,KUWAIT
  Feb 2009 - Sep 2012

   Actively support coordination / progress meeting with agenda to facilitate meeting execution.  Oversee the preparation, tracking and completion of contractor’s coating punch list.  Document and communicate Lessons Learned in all above responsibilities.  Ensure all coating materials are stored in accordance with specification & procedures (MSDS is displayed where necessary) and all waste products are disposed of safely & correctly.  Develop and review coating procedure and inspection test plan  Understand the project schedule and be protective in assessing where activities could impact the planed progress advising HST leads.  Familiarize self with design drawings, specification, applicable codes, standards and practices and project quality plan.  Actively support coordination / progress meeting with agenda to facilitate meeting execution.  Oversee the preparation, tracking and completion of contractor’s coating punch list.  Document and communicate Lessons Learned in all above responsibilities.  Ensure all coating materials are stored in accordance with specification & procedures (MSDS is displayed where necessary) and all waste products are disposed of safely & correctly.
• Painting Supervisor at Cleveland Bridge & Eng. Ltd.Dubai, U.A.E
  Dec 2005 - Dec 2008

   Identify the total scope of project requirement of material to complete the 100% work.  Site focal point for painting work identifies the total painting SCOPE and requirement of material.  Coordination with contractor to get daily progress details of Blasting & painting take necessary action.  Maintain permanent communication with the client and management to supervisor and control the painting activity.  Train local employees to supervise progress reporting system.  Monitor the daily activity of shop & field daily progress; engage them for priority systems completion if any.  Attend to the Daily Test pack meeting with sub-contractor for the Expedition for the priority system.  Good Knowledge of GA drawing & P&ID, Piping Isometrics & Structural Drawings.  Responsible for monitoring, checking, controlling of progress status of shop and field production.  To check the substrate in accordance to the relevant standards before elution of blasting & painting.  To control and allocate manpower to handle various work assignment in accordance to the project schedule.  To check and ensure the climate conditions as per acceptable standards. • Paint curing tests (M.E.K. Test) • Holiday testing impact tests, Hardness testing, salt and chloride contamination testing and Cross adhesive tests as per specification.  Preparation of painting inspection reports and other relevant inspection documents.  To conduct inspection to surface preparation, subsequent coatings.  Inspection of paint materials and to maintain in accordance with product batch certificates.  To coordinate with client personal, supervision, paint manufacturers to conduct inspections.  To attend project quality control meetings.  Represent project site meetings, preparation of site requires work activity.  Wrapping/coating of underground pipeline as per specification. During the routine working period, I have proven to be an excellent employee in the company & have wide knowledge in the field of Blasting & painting.
• Supervisor Painting/Insulation at Tecnicas Reunidas (TR)
  Aug 2017

   Under Monitoring the various Sub Contractors SINOPEC, KAEFER, NSH, CAPE, SBC, MTC for painting work progress to assure timely completion, with periodic status reports provided to the Production Management.  Promotes a safe working environment using safety briefs; promoting/enforcing PPE, discussing job hazard analysis and accident prevention.  Ensures the Quality of the paint processes for the projects required to validate in-process work, support operational needs and identify opportunities for improvement.  Reviews paint production processes and equipment to ensure that continuous improvement principles are considered and utilized.  Identify equipment issues that require corrective action and ensure completion of required repair work.  Provides direction to the work group and holds staff accountable for results and improvements, taken corrective measures as required.

• DIPLOMA MECHANICAL ENGINEERING
  MECHANICAL ENGINEERING at MG Educational Institute,India
  2001 - 2004