POST APPLIED FOR: Senior QA/QC (Electrical & Instrumentation)

OBJECTIVE:

My objective is to secure a job in the field of Electrical Engineering with emphasis on quality control and management system. Experience in handling end to end Electrical & Instrumentation activities.

PROFILE:

• QA/QC Electrical Engineer with more than 7+ years of experience in oil & gas , power plant industries in India & abroad. Experienced in all aspects of QA/QC, management, development of project specific contract quality plan, procedure, work instructions & quality control plans.
• Experience in Quality Assurance, Quality Control, Process Enhancements and Man Management & Vendor Inspection & Auditing.
• Expertise in low, medium & high voltage systems installation, Testing & inspection as per required specification and procedure.

KEY RESPONSIBILITIES HANDLED:

• Reviewing Sub-Contractors Contractual obligations, QA/QC plans and procedures to verify if they comply with contractor’s contractual conditions.
• Review of Design and Construction drawings including As-Built Drawings
• Guide & direct site engineers, supervisors as applicable to ensure project deliverables fully reflect QA/QC.
• Study the contract documents and applicable standards or specifications prior to execution of any jobs. 
• Review records of internal and external Audits performed by the Contractor.
• To conduct regular internal Audits for different departments to ensure that the organization is fulfilling the requirement of Quality Management System as per ISO 9001:2008 Standards.
• Coordinate with Project Manager, Main contractor’s MEP coordinators for smooth implementation of Quality Management System.
• Monitor site progress through weekly progress meetings with subcontractors and main contractor.
• Carried out joint inspection activities along with the client representatives on site work based on RFI with the help of supporting documents.
• Was responsible for performing quality check & issuance of conformance / non-conformance report to the contractors.
• Tracking of Testing Equipment’s and Instruments for Calibration Records.
• Preparing TOP Matrixes and SLD s for Commissioning Walk downs.
• Handing over Final Documentation & participating in FATs, SATs.

EDUCATION:

• B. Tech (Electrical and Electronics), SCMS School of Engineering and Technology, Mahatma Gandhi University, Kerala (2008)

Major Courses: Electronics, Circuit Analysis, Linear System, Digital Electronics, Microprocessor, Control & Instrumentation, Robotic Systems, Electronic Devices, Magnetic Theory, Linear Algebra, Computer Systems and applications

• Post Graduate Diploma in OFFSHORE ELECTRICAL ENGINEERING, TYCHE Engineering Training.

 EXPERIENCE HIGHLIGHTS:                      

1. COMPANY              : SYSTEM PROTECTION & MAINTENANCE SDN BHD

PERIOD                  : MARCH 2014 Onwards

LOCATION               : MALAYSIA

DESIGNATION         : QA/QC SYSTEM ANALYST ENGINEER

PROJECT                  : TANJUNG BIN 4 SUPER CRITICAL 1 × 1000 MW
                                  COAL FIRED POWER PLANT   

CLIENT                    : MALAKOFF

MAIN CONTRACTOR: ALSTOM

JOB PROFILE

• Preparation of Quality related documents such as Quality control plan, ITP, Method statement and related work instructions.
• Preparation & quality verification of Electrical SLD’s, schematics & layout drawings
• Preparing System Turn over Protocols and SLD s for Commissioning Walk downs
• Material Inspection & Equipment specifications.
• Familiar with IEEE, IEC, API & NEC Codes and other industrial standards
• Installation,Inspection,Testing & commissioning of all electrical equipment’s such as:
  • MV/LV-Transformers, Switchgears, Motors, Cable Bus Ducts, Power Cables
  • DC System - UPS, Battery Chargers, Storage Batteries, Diesel Generator Set
  • Earthing / Grounding System
  • Local Distribution Panel Boards, Socket Outlets,MCS
    1. COMPANY              : CONSOLIDATED CONTRACTORS INTERNATIONAL CO.    

PERIOD                  : April 2011 TO FEBRUARY 2014

LOCATION               : Abu Dhabi (UAE)

          DESIGNATION         : QC Inspector (Electrical & Instrumentation)

           KEY PROJECTS    

• IGD Habshan-5 Process plant project – Client - GASCO, JGC
• Qusahwira full field Development Project – Client –ADCO,NPCC

          JOB PROFILE

• Inspection & testing of all electrical equipment’s
• Preparation & quality verification of Electrical SLD’s, schematics & layout drawings
• Material Inspection & Equipment specifications.
• Testing & commissioning of all electrical equipment’s such as:

MV/LV-Transformers, Switchgears, Motors, , Power Cables,DC System, lighting system, Grounding system,cathodic protection,cabling,cable tray

Electrical Tests including IR test, Hi-pot test, winding test etc.

• Equipment’s Used
  • Insulation resistance tester
  • Earth Tester
  • Micro ohm meter
  • Dielectric Tester
    • Quality Control Inspection of construction activities at various Inspection Stages such as Pre-Installation, Installation & Pre-Commissioning, Final Inspection for various electrical & Instrument equipment’s, Perform Routine Surveillance
    • Review Quality Documentation (ITP, Procedures, Drawings & Vendor Data Sheets, Material Specifications and other Quality related documents)
    • Issue of NCRs and implementing the corrective actions in conformance with the client’s standards & Specifications

1. Company               : ESSAR TELECOMMUNICATION INFRASTRUCTURE

                                 PVT.LTD(ATC)  

PERIOD                  : December 2008 to April 2011

DESIGNATION         : ELECTRICAL ENGINEER O&M/PROJECT

JOB PROFILE:      

• Quality Inspection of the installation of electrical equipments
• Preventive maintenance of Generators, SMPS & Battery Ban
• Audit for Battery backup, DC Load, Diesel & EB Consumption
• Power Distribution and Lighting Systems.
• Main and Emergency Power systems& Working philosophies
• Fire, Gas and General Alarm System
• Hazardous Areas
• Knowledge with regards to the Design & Selection of Generators, Transformers, Circuit Breakers & Switchgear, Cables, Lighting Systems
• Batteries and Battery Chargers, Voltage Drop, Basic Short Circuit Calculation

COMPUTER SKILLS

• AutoCAD (Electrical)
• PC Schematic Electrical Automation
• MS Office

ACADEMIC PROJECTS

• Reduction of Maximum Demand: Design of Capacitor Banks for different furnaces in CARBORANDUM UNIVERSAL Co. The study improved the power factor and reduced the maximum demand.
• Seminar on Electronic Road Pricing System

PERSONAL INFORMATION

Date of Birth:   01-03-1987

Passport No:    H0732857

Expiry Date:     15-10-2018